HDMI v1.3 Test Adapter Board Set
Product Number:
ET-HDMI-TPA-S..... $12,340
| |
11.25Gbps HDMI to SMA test adapter optimized for v1.3 testing of the latest 1080p formats at the highest color depths up to 450 MHz.
The HDMI-TPA-S provides a very high-bandwidth, low-noise evaluation vehicle that enables high-performance characterization of both plug and receptacle HDMI™ devices with bandwidth greatly exceeding the 340 MHz (10.2 Gbps) of the latest v1.3 HDMI specification supporting 1080p at 30, 36, or 48-bit color.
The plug and receptacle test adapter boards included in this set feature ultra-low insertion and return loss with near-perfect signal integrity to assure that electrical results reflect the device under test, and not the fixture.
STANDARDS & COMPATIBILITY
- Compliant with HDMI v1.3 1080p 48-bit color requirements
- 11.25 GHz support for entire v1.3 single-link bandwidth of 10.2 Gbps
- Industry standard HDMI plug/receptacle
|
 |
| HDMI TPA-P Plug Board |
|
|
FEATURES
- 10.2 Gbs performance per differential pair
- Insertion loss less than -3 dB at 11.25 GHz
- Return loss less than -15 dB at 6.75 GHz
- Trace differential impedance 100 +/- 5 ohms (50 +/- 2.5 ohms single ended)
- Calibration traces to zero out test fixture attributes
- Electrical tests performed on 2x trace with 2" GPPO to SMA adapter cables
|
 |
| HDMI TPA-RC Receptacle/Calibration Board |
|
|
WHAT'S INCLUDED
- ET-HDMI-TPA-S Test Adapter Set* includes the following:
(1) ET-HDMI-TPA-P plug board
(1) ET-HDMI-TPA-R receptacle board
(1) ET-HDMI-TPA-RC receptacle & calibration board
(1) ET-HDMI-TPA-CE low voltage EDID board w/v.1.2 & v.1.3 EEPROM
(29) SMA to GPPO cables 2 inches long**
STAND ALONE PRODUCTS & OPTIONS – Available to be purchased separately
ET-HDMI-TPA-P plug board
|
$4,350
|
(requires 8 cables, not included, see below)
|
|
|
| ET-HDMI-TPA-R receptacle board |
$2,250 |
| (requires 8 cables, not included, see below) |
|
|
| ET-HDMI-TPA-RC calibration board |
$2,400 |
| (requires 13 cables, not included, see below) |
|
|
| ET-HDMI-TPA-CE low voltage EDID board |
$440
|
| w/v.1.2 & v.1.3 EEPROM |
|
|
| 2" SMA to GPPO cables** |
$100 ea |
| 6" SMA to GPPO cables |
$150 ea |
| 24" SMA to GPPO cables |
$200 ea |
* Product purchased as a set will come from the same manufacturing lot and be optimally matched for calibration purposes. Product purchased individually will meet all specifications but cannot be guaranteed to be from the same manufacturing lot for optimal calibration.
** Efficere's HDMI product is tested and specified with 2" cables.
PLEASE NOTE - CTS v1.3 Specification Error
The v1.3 specification released by the HDMI consortium has a part number error as it refers to the Efficere TPA. They list "Tektronix EFF-HDMI-TPA-P" in section 4.2.1.1.6 on spec page 11. Tektronix subsequently decided to not resell the Efficere product. The proper part number to order that product directly from Efficere is ET-HDMI-TPA-P for the HDMI plug to SMA TPA. The receptacle and calibration boards are listed above as is the set which consists of plug, receptacle, calibration, and EDID boards.
HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.
|
|
