Type-C Compact HDMI v1.3 Test Adapter Board Set
Product Number:
ET-HDMIC-TPA-S..... $15,440
| |
11.25Gbps Compact Type-C HDMI to SMA test adapter optimized for v1.3 testing of the latest 1080p formats at the highest color depths up to 450 MHz.
The HDMIC-TPA-S provides a very high-bandwidth, low-noise evaluation vehicle that enables high-performance characterization of both plug and receptacle HDMI™ devices with bandwidth greatly exceeding the 1.75 GHz (10.2 Gbps) of the latest v1.3 HDMI specification supporting 1080p at 30, 36, or 48-bit color.
|
 |
| Plug Board - Top View |
|
|
The plug and receptacle test adapter boards included in this set feature ultra-low insertion and return loss with near-perfect signal integrity to assure that electrical results reflect the device under test, and not the fixture.
STANDARDS & COMPATIBILITY
- Compliant with HDMI v1.3 1080p 48-bit color requirements
- 11.25 GHz support for entire v1.3 single-link bandwidth of 10.2 Gbps
- Industry standard HDMI plug/receptacle
|
 |
| Plug Board - Bottom View |
|
|
FEATURES
- 10.2 Gbs performance per differential pair
- Insertion loss less than -3 dB at 11.25 GHz
- Return loss less than -16.4 dB at 6.75 GHz
- Trace differential impedance 100 +/- 5 ohms (50 +/- 2.5 ohms single ended)
- Calibration traces to zero out test fixture attributes
- Electrical tests performed on 2x trace with 2" GPPO to SMA adapter cables
|
 |
| With GPPO Cables Attached |
|
|
WHAT'S INCLUDED
- ET-HDMIC-TPA-S Test Adapter Set* includes the following:
(1) ET-HDMIC-TPA-P plug board
(2) ET-HDMIC-TPA-R receptacle boards
(1) ET-HDMIC-TPA-C calibration board
(1) ET-HDMIC-TPA-CE low voltage EDID board w/v.1.2 & v.1.3 EEPROM
(29) SMA to GPPO cables 2 inches long**
|
 |
| Receptacle Board - Top View |
|
|
STAND ALONE PRODUCTS & OPTIONS – Available to be purchased separately
ET-HDMIC-TPA-P plug board
|
$5,900
|
(requires 8 cables, not included, see below)
|
|
|
| ET-HDMIC-TPA-R receptacle board |
$2,500 |
| (requires 8 cables, not included) |
|
|
| ET-HDMIC-TPA-C calibration board |
$1,200 |
| (requires 5 cables, not included) |
|
|
| ET-HDMI-TPA-CE low voltage EDID board |
$440
|
| w/v.1.2 & v.1.3 EEPROM |
|
|
| 2" SMA to GPPO cables** |
$100 ea |
| 6" SMA to GPPO cables |
$150 ea |
| 24" SMA to GPPO cables |
$200 ea |
|
 |
| Receptacle Board - Bottom View |
|
|
 |
| Calibration Board - Top View |
|
|
* Product purchased as a set will come from the same manufacturing lot and be optimally matched for calibration purposes. Product purchased individually will meet all specifications but cannot be guaranteed to be from the same manufacturing lot for optimal calibration.
** Efficere's HDMI product is tested and specified with 2" cables.
HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.
|
 |
| With GPPO Cables Attached |
|
|
 |
| Calibration Board - Bottom View |
|
|
|
